High Temperature Gas Conveying High Pressure Explosion-Proof Ventilation Fan

• Material: Iron
• Usage: for Experiment, for Air Conditioner, for Manufacture, for Refrigerate
• Flow Direction: Centrifugal
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 9-19 Series Centrifugal
• Pressure: High Pressure
• Certification: RoHS, UR, ISO, CE, CCC
• Color: Red/Blue/Green etc.
• Protection Level: IP55/IP65
• Insulation Level: F/H
• Transportation Method: Sea Transportation, Land Transportation
• Transport Package: Wooden Packing
• Specification: Different models, different sizes
• Trademark: HENGDING
• Origin: China
• HS Code: 8414513000
• Production Capacity: 10, 000 Units/Year
• Package Size: 100.00cm * 100.00cm * 150.00cm
• Package Gross Weight: 400.000kg
• Lead Time: 7 days (1 - 5 Sets) ; 15 days (6 - 10 Sets) ; 30 days (11 - 30 Sets) ; To be negotiated ( > 30 Sets)

Product Description

Product Description

9-19 series high-pressure centrifugal fans can be used for general ventilation and indoor ventilation in general factories and large buildings. Can be used as both input gas and output gas. The transported gas should be air and other gases that are non-self-igniting, harmless to the human body, and non-corrosive to steel materials. The gas does not contain viscous substances, and the dust and hard particles contained are not more than 150mg/m³.

Scope of application
Forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line grate cooler cooling, circulating fluidized bed systems, air purification and industrial waste gas treatment, flue gas desulfurization, ventilation of industrial boilers or incinerators, large mill systems, Industrial waste heat recovery devices, blasting of smelting furnaces and casting furnaces, combustion support in blast furnaces, coal injection in blast furnaces, pressurized transportation of gas, pressurized or depressurized sealing of industrial equipment, etc.

Device Configuration
Fan form: A-type motor direct connection, C-type belt drive, D-type coupling drive;
Motor brand: Yineng Motor (default), Lu'an Motor, Wannan Motor, Siemens and other well-known brands (can be specified);
Impeller: high-quality carbon steel, stainless steel, rubber lining, wear-resistant layer or wear-resistant lining plate, ceramic patch (can be specified);
Spindle: high-strength carbon steel, stainless steel, composite steel, etc.;
Bearing seat: cast iron
Optional configurations: Integral bracket; Protective cover; Muffler; Inlet and outlet compensator; Inlet and outlet matching flange; Adjusting door; Electric actuator; Shock absorber; Diaphragm coupling; Hydraulic coupler; Motor rain cover; Temperature sensor; Vibration sensor; Soft start device; Inverter;

 

Detailed Photos

 

Product Parameters

Fan model	8-09, 9-19, 9-26,10-19 etc.
Pressure	600Pa ~ 90000Pa
Air volume	1.6m³/s ~ 352m³/s
Power	1.1kW ~ 1600kW

Type	Motor Power	Voltage	Frequency	Speed	Air Flow	Pressure
		V	Hz	r/min	m3/h	Pa
9-19 3.15A	0.75KW-2P	380	50	2830	402-545	2223-2262
	1.1KW-2P	380	50	2830	617-832	2231-2017
9-19 3.55A	1.5KW-2P	380	50	2840	560-760	2545-2590
	2.2KW-2P	380	50	2840	860-1160	2554-2310
9-19 4A	2.2KW-2P	380	50	2840	824-1264	3584-3597
	3KW-2P	380	50	2870	1410-1704	3507-3253
9-19 4.5A	4KW-2P	380	50	2890	1174-2062	4603-4447
	5.5KW-2P	380	50	2900	2281-2504	4297-4112
9-19 5A	7.5KW-2P	380	50	2900	1610-2844	5697-5517
	11KW-2P	380	50	2900	3166-3488	5323-5080
9-19 5.6A	11KW-2P	380	50	2900	2622-3619	7182-7109
	15KW-2P	380	50	2900	3309-4260	7068-6755
	18.5KW-2P	380	50	2900	3996-4901	6954-6400
9-19 6.3A	18.5KW-2P	380	50	2900	3220-5153	9149-9055
	22KW-2P	380	50	2900	4455-6066	9003-8601
	30KW-2P	380	50	2900	5690-6978	8857-8148

Installation Instructions

1) Before installing the fan, the mechanical and electrical area must check the appearance of the fan. If it is not qualified, installation is not allowed.

2) The air inlet of the fan must be clear and unobstructed within 2 meters. No accumulation of debris or placement of starting devices is allowed. The installation location of the starting device must be convenient for personnel to operate.

3) After installation, carefully check whether the ventilator is deformed or damaged and whether the connecting bolts and base snap rings are secure.

4) The ventilator must be managed and operated by a dedicated person.
 

Company Profile