| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Usage: | for Experiment, for Air Conditioner, for Manufacture |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The purpose of the fan
Y9-35 type single-suction boiler centrifugal fan and Y9-35 type single-suction and Y9-35 double-suction boiler induced draft fans are suitable for ventilation and induction systems of 2~240t/h steam boilers. The basic model of the ventilator is "9-35", and the basic model of the induced draft fan is "Y9-35".
Type of fans
1) Supplementary models for single-suction and induced draft fans are "11" or "12", supplementary models for double-induced fans are "03", where the first digit 1 and 0 represent single-suction and double-suction, and the second digit The numbers are design serial numbers. Refer to the performance table for the performance parameters of the ventilation and induced draft fans.
2) The transmission mode is connected to the motor coupling and transmission, the single suction fan is D type, and the double suction fan is F type.
3) Looking at the rotation direction of the impeller from the direction of the motor, the clockwise one is called a forward fan, and the counterclockwise one is called a reverse fan.
The structure of the fan
1) The impeller is welded by forward-curved blades, a conical front disk, and a flat rear disk (or middle disk), and riveted on the shaft disk. The blades of the induced draft fan are thicker due to greater wear. And the root of the blade on the back plate (or middle plate) is welded with a wear-resistant layer to prolong the service time.
2) The main shaft of the transmission part is made of high-quality steel. The single-suction fan, induced draft fan, and double-suction induced draft fan all use rolling bearings. The bearings are equipped with thermometers and oil level indicators, and the induced draft fan has a cooling water device.
3) The casing is a volute body welded with steel plates. There is a thick liner on the volute plate of the induced draft fan for replacement after wear and tear.
4) Single-suction and induced draft fans are equipped with eight petal-type flow regulators at the inlet, and double-suction induced draft fans are equipped with four simple flow regulators on the air intake boxes on both sides to adjust the user flow.
Applications of Induced draft fan Industrial air blower centrifugal fans
Ventilating
Forced ventilating, Building ventilating, Mine ventilating, Tunnel ventilating, Materials ventilating and drying.
Cooling and heat dissipation
Forced cooling and heat dissipation, Industrial equipments cooling and heat dissipation.
Air purification and industrial waste gas treatment, Air filtration system, Flue gas desulfurization, Flue gas denitrification.
Boiler's air supply and exhaust (Coal-fired boiler, Biomass boiler, Garbage incinerator, CFB boiler, Stoker feed boiler.).
Industrial boiler blowing air, Industrial boiler inducing air, Industrial boiler primary air, Industrial boiler secondary air.
Industrial boiler waste gas desulfurization, Industrial boiler flue gas denitrification.
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
G9-35 |
6D |
1912 | 3710 | 4-4 |
| 2000-2098 | 4640-6500 | 4-7.5 | ||
| 2108-1990 | 7430-10220 | 4-11 | ||
| 833-921 | 2460-5530 | 6-3 | ||
| 912-973 | 6140-6750 | 6-4 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
G9-35 |
8D |
1490-1549 | 5810-7270 | 6-7.5 |
| 1598-1834 | 8720-13080 | 6-11 | ||
| 1608-1540 | 14640-16000 | 6-15 | ||
| 863-932 | 4430-6650 | 8-4 | ||
| 941-951 | 7760-9980 | 8-5.5 | ||
| 932-892 | 11090-12200 | 8-7.5 | ||
10D |
2324 | 11350 | 6-15 | |
| 2412-2510 | 14200-17050 | 6-22 | ||
| 2549-2569 | 19900-22750 | 6-30 | ||
| 2569-2520 | 25600-28400 | 6-37 | ||
| 2412 | 31250 | 6-45 | ||
| 1353-1412 | 8650-10800 | 8-7.5 | ||
| 1451-1481 | 13000-15150 | 8-11 | ||
| 1461-1402 | 21600-23800 | 8-18.5 | ||
| 1491 | 17300-19450 | 8-15 | ||
12D |
3353 | 19620 | 6-37 | |
| 3305 | 24520 | 6-45 | ||
| 3521 | 29420 | 6-55 | ||
| 3677-3697 | 34330-39230 | 6-75 | ||
| 3697-3638 | 44140-49040 | 6-90 | ||
| 3481 | 63940 | 6-110 | ||
| 1893 | 14920 | 8-15 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
G9-35 |
12D | 2020 | 18650 | 8-22 |
| 2088-2128 | 22380-26110 | 8-30 | ||
| 2137 | 29840-33570 | 8-37 | ||
| 2098-2010 | 37300-41030 | 8-45 | ||
13.5D |
2451 | 21240 | 8-30 | |
| 2559-2648 | 26550-31860 | 8-37 | ||
| 2687 | 37170 | 8-45 | ||
| 2707 | 42480-47790 | 8-55 | ||
| 2658-2550 | 53100-58410 | 8-75 | ||
| 4236-4433 | 27920-34900 | 6-75 | ||
| 4560 | 41880 | 6-110 | ||
| 4658-4678 | 48860-55840 | 6-132 | ||
| 4678 | 62820 | 6-160 | ||
| 4599-4413 | 69800-76780 | 6-185 | ||
| 15.5D | 3236 | 32160 | 8-55 | |
| 3383-3481 | 40200-48240 | 8-90 | ||
| 3550-3569 | 56280-64320 | 8-110 | ||
| 3569 | 72360 | 8-132 | ||
| 3501-3364 | 80400-88440 | 8-160 | ||
| 2039-2196 | 25600-38400 | 10-45 | ||
| 2245-2255 | 44800-51200 | 10-55 | ||
| 2255 | 57600 | 10-75 | ||
| 2216-2118 | 64000-70400 | 10-90 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
G9-35 |
18D |
4364 | 50400 | 8-132 |
| 4560 | 63000 | 8-160 | ||
| 4707 | 75600 | 8-185 | ||
| 4785 | 88200 | 8-220 | ||
| 4815 | 10800 | 8-250 | ||
| 4815 | 113400 | 260 | ||
| 4726 | 126000 | 310 | ||
| 4530 | 138600 | 370 | ||
| 2755 | 40080 | 10-75 | ||
| 2883-2971 | 50100-60120 | 10-90 | ||
| 3020 | 70140 | 10-110 | ||
| 2951 | 80160 | 10-132 | ||
| 2951-2991 | 90180-100200 | 10-160 | ||
| 2863 | 110220 | 10-185 | ||
20D |
5393 | 69200 | 220 | |
| 5639 | 86500 | 250 | ||
| 5805 | 103800 | 284 | ||
| 5913 | 121100 | 380 | ||
| 5952-5925 | 138400-15570 | 440 | ||
| 5844 | 173000 | 500 | ||
| 5599 | 190300 | 625 | ||
| 3403 | 54960 | 10-90 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
G9-35 |
20D |
3756 | 68700 | 10-132 |
| 3667 | 82440 | 10-160 | ||
| 3736 | 96180 | 10-185 | ||
| 3756 | 109920 | 200 | ||
| 3756 | 123660 | 230 | ||
| 3687-3540 | 13740-151140 | 280 | ||
Y9-35 |
8D |
921-961 | 5810-1270 | 6-4 |
| 1000-1020 | 8720-13080 | 6-7.5 | ||
| 1000-961 | 14540-16000 | 6-11 | ||
| 539-578 | 4430-11090 | 8-4 | ||
| 558 | 12200 | 8-5.5 | ||
10D |
1451 | 11350 | 6-11 | |
| 1510-1559 | 14200-17050 | 6-15 | ||
| 1588 | 19900 | 6-18.5 | ||
| 1598-1608 | 22750-25600 | 6-22 | ||
| 1569-1500 | 28400-31250 | 6-30 | ||
| 843-872 | 8650-10800 | 8-5.5 | ||
| 902-922 | 13000-15150 | 8-7.5 | ||
| 922 | 17350-19450 | 8-11 | ||
| 912-872 | 21600-23800 | 8-15 | ||
| 12D | 2079-2177 | 19620-24520 | 6-30 | |
| 2245 | 29420 | 6-37 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
Y9-35 |
12D |
2285 | 34330 | 6-45 |
| 2294 | 39230-44140 | 6-55 | ||
| 2255-2167 | 49040-53940 | 6-75 | ||
| 1206-1255 | 14920-18650 | 8-15 | ||
| 1294 | 22380 | 8-18.5 | ||
| 1323 | 26110-29840 | 8-22 | ||
| 1323-1304 | 33570-37300 | 8-30 | ||
| 1245 | 41030 | 8-37 | ||
13.5D |
2638-2755 | 27920-34900 | 6-55 | |
| 2834-2893 | 41880-48860 | 6-75 | ||
| 2912 | 55840 | 6-90 | ||
| 2912-2736 | 62820-76780 | 6-132 | ||
| 1520 | 21240 | 8-22 | ||
| 1588-1647 | 26550-31860 | 8-30 | ||
| 1676 | 37170 | 8-37 | ||
| 1686 | 42480-47790 | 8-45 | ||
| 1657-1578 | 53100-58410 | 8-55 | ||
15.5D |
2010 | 32160 | 6-45 | |
| 2098 | 40200 | 8-55 | ||
| 2167-2206 | 48240-56280 | 8-75 | ||
| 2216 | 64320-72360 | 8-90 | ||
| 2177-2088 | 80400-88440 | 8-110 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
Y9-35 |
15.5D | 1323-1372 | 32000-64000 | 10-45 |
| 1314 | 70400 | 10-55 | ||
18D |
2706 | 50400 | 8-75 | |
| 2824 | 63000 | 8-110 | ||
| 2922 | 75600 | 8-132 | ||
| 2971 | 88200 | 8-160 | ||
| 2991 | 100800-113400 | 8-185 | ||
| 2942 | 126000 | 8-220 | ||
| 2814 | 138600 | 8-250 | ||
| 1716 | 40800 | 10-45 | ||
| 1784 | 50100 | 10-55 | ||
| 1843 | 60120 | 10-75 | ||
| 1873-1892 | 70140-90180 | 10-90 | ||
| 1853-1775 | 100200-110220 | 10-110 | ||
20D |
3344 | 69200 | 8-132 | |
| 3501 | 86500 | 8-185 | ||
| 3608 | 103800 | 8-220 | ||
| 3677 | 121100 | 8-250 | ||
| 3697 | 138400 | 315 | ||
| 3697-3628 | 155700-173000 | 380 | ||
| 3481 | 190300 | 400 | ||
| 2118-2206 | 54960-68700 | 10-90 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
Y9-35 |
20D | 2275 | 82440 | 10-110 |
| 2324 | 96180 | 10-132 | ||
| 2334 | 109920-123660 | 10-160 | ||
| 2294 | 137400 | 10-185 | ||
| 2196 | 151140 | 220 | ||
13.5F |
2844 | 55800 | 6-90 | |
| 2981 | 69800 | 6-110 | ||
| 3040 | 83800 | 6-160 | ||
| 3079-3020 | 97600-111600 | 6-185 | ||
| 2981 | 125500 | 6-200 | ||
| 2902-2804 | 139600-153500 | 6-250 | ||
| 1637 | 42400 | 8-45 | ||
| 1716 | 53000 | 8-55 | ||
| 1755 | 63600-74200 | 8-75 | ||
| 1745 | 84800 | 8-90 | ||
| 1716-1618 | 65500-116500 | 8-110 | ||
| 1039-1088 | 33700-75800 | 10-45 | ||
| 1059-1029 | 84400-92600 | 10-55 | ||
| 15.5F |
2157-2255 | 64300-80500 | 8-110 | |
| 2304 | 36500 | 8-132 | ||
| 2353-2304 | 112500-192000 | 8-160 | ||
| 2255 | 145000 | 8-185 |
| Model number |
Type No |
Pressure Pa |
Flow Rate m3/h |
Motor |
Y9-35 |
15.5F |
2206 | 161000 | 210 |
| 2137 | 171000 | 245 | ||
| 1372 | 51200 | 10-45 | ||
| 1431 | 64000 | 10-55 | ||
| 1471 | 76800 | 10-75 | ||
| 1480-1431 | 89500-115000 | 10-90 | ||
| 1402-1353 | 128000-140500 | 10-110 | ||
18F |
2922-3138 | 100800-151200 | 260 | |
| 3177-3118 | 176400-201600 | 310 | ||
| 3069 | 226800 | 370 | ||
| 2991-2893 | 252000-277200 | 440 | ||
| 1843-1931 | 80000-180000 | 200 | ||
| 1892-1824 | 200000-220000 | 230 | ||
| 1265-1245 | 96250-182200 | 12-132 |
Our company has passed CCC fire product compulsory certification, ISO9001 quality management system certification, CE EU certification, KA mining product safety landmark certification, and other certifications.
1. The equipment is equipped with a number of signs, such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2. Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time.
3. Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo.
4. All equipment is waterproof and rainproof.
Q. What information should I provide when inquiring?
A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature
Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.
Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.
Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.
Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan, anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc. Please contact us to learn more details.
Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Q. How long will it take to ship after the order?
A. 2-15 days if you need it urgently; we can discuss it for a short time.
Q. Is the product customizable?
A. Various types can be customized.
){kind=link}